-40%
Barbed 1/2

Barbed 1/2" Tubing Tee For Drip Irrigation Systems-5 pack

$ 3.33

Availability: 346 in stock
  • Return shipping will be paid by: Buyer
  • Condition: New
  • Refund will be given as: Money Back
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • Type: Drip Irrigation - Tees
  • Brand: Tempo
  • MPN: FIT18

    Description

    Use this Barb Tubing Tee insert fitting to connect three sections of tubing together.
    Quality barbed fittings provide high retention in low-pressure poly tubing for long-term reliability of connections. The acetal fittings can be confidently installed without clamps when matched with our quality low-pressure poly tubing with corresponding dimensions. See note below on gray PVC fittings.
    Features:
    Sharp-edged barbs create leak-proof seal
    Increased strength and superior quality
    Heat, chemical and wear-resistant
    UV stabilized materials for long life
    Special Note:
    1/4" barbed fittings have the unique ability to be "snapped" into larger tubing after punching a hole into the side of the larger tubing with any of our 1/4" punch tools. This creates a water-tight seal and allows you to "tee-off" of larger diameter tubing using only 1/4" fittings and a hole punch.
    Fitting Size
    Acceptable Inside Tubing Diameter
    Fitting Use
    Max Operating Pressure
    1/8"
    .125"
    To connect sections of 1/8" tubing or to connect 1/8" tubing to mainline tubing
    Up to 30 PSI
    1/4"
    .170"
    To connect sections of 1/4" tubing or to connect 1/4" tubing to mainline tubing
    Up to 30 PSI
    1/2"
    .570" to .620"
    To connect sections of 1/2" poly tubing together
    Up to 30 PSI
    3/4"
    .805" to .820"
    To connect sections of 3/4" poly tubing together
    Up to 40 PSI
    1"
    1.06"
    To connect sections of 1" poly tubing together
    up to 40 PSI